St. Patrick’s Day Resin Coasters | Another Coaster Friday | Craft Klatch

Celebrate St. Patrick’s Day in style with these resin coasters!










You will need:
The links below help support this channel,  as I may earn a small commission at no extra cost to you.


You will need:
Mold:  https://amzn.to/2FcRd7J
Erasers:  https://amzn.to/2u16KTz
Orange pigment:  https://amzn.to/2IKKFD6
Lighter:  https://amzn.to/2NQusts
Resin (use whatever resin brand you like):
Easy Cast:  https://amzn.to/2yjYmBC
Art Resin:  https://amzn.to/2yk9X3z
Clear Cast:  https://amzn.to/2z4rxGw
This is the resin I used for this project:

FX Poxy:  https://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.


Here is  quick video tutorial, so you can see exactly how I made them:












Directions:
1.  I found these super cute erasers at the party store.


2.  I mixed two ounces of resin and split them into two cups.

3.  I poured the clear cup into one of the cavities in the mold.

4.  I added a small amount of orange pigment to the second cup.

5.  I mixed it really well.

6.  I used my lighter to pop the bubbles.

7.  I began adding the erasers.

8.  I then poured the orange into the mold.

9.  I popped the bubbles with the lighter.

10.  I began adding the erasers to the resin.  Be careful because you don’t want to have to move any in the orange resin around.

11.  I quickly popped the bubbles.  Don’t stay in one place too long, you don’t want to melt the erasers.  I let it cure for a minimum of 12 hours.

12.  I mixed two more ounces of resin and poured it over the coasters.

13.  I popped the bubbles with my lighter and let them sit for a minimum of 12 hours.

14.  When cured, I removed them from their mold.

Now I have a couple of cute and festive resin coasters!


That’s it!  Thanks for stopping by!  Remember:  Life’s too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!


Mona

Leave a Comment