Learn how to make a Pineapple Resin Coaster! It’s an easy resin craft tutorial!
Materials list:
Coaster mold: https://amzn.to/2GYeDjH
Pigment powder: https://amzn.to/2YXuWUh
Glue: https://amzn.to/2TfvjrS
Paint – mushroom: https://amzn.to/2GUpc7e
Paint: – brown: https://amzn.to/2MQ01Xk
Paint – green: https://amzn.to/2KnVUA3
Paint – antique gold: https://amzn.to/2GY2knt
Paint – pewter: https://amzn.to/2GUlElw
Craft foam: https://amzn.to/2YWDeeS
Resin (use whatever resin brand you like):
Easy Cast: http://amzn.to/2yjYmBC
Art Resin: http://amzn.to/2yk9X3z
Clear Cast: http://amzn.to/2z4rxGw
This is the resin I used for this project:
FX Poxy: http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.
Creating with Craft Klatch Facebook Group: https://www.facebook.com/groups/CreatingWithCraftKlatch/
Here is a video tutorial, so you can see exactly how I did it:
Directions:
2. I mixed it well and poured it into the mold.
3. I popped the bubbles with my lighter. I let it cure a minimum of 12 hours.
4. Once cured, I removed it from the mold. I used a pewter paint to draw lines across in both directions.
5. I added a dot in all of the holes.
6. Once the paint dried, I added one more ounce of resin. I did it slowly, so it would not overflow the sides.
7. I popped the bubbles with my lighter and let it cure a minimum of 12 hours.
8. Once cured, I traced around the coaster.
9. I added the top to the pineapple.
10. I cut out the pineapple, to use as a template.
11. I traced it onto the craft foam.
12. I cut it out.
13. I used different paints to paint the top and around the edges.
14. I added glue that dries clear and I moved it around.
15. I placed the resin coaster onto the craft foam.
That’s it!!!
