Resin Heart Paperweights | Resin Crafts | Craft Klatch

Learn how to make confetti heart paperweights, with resin!



Here is a quick tutorial to see how:


You will need:
(Links below contain affiliate links.  I may receive a small commission, at NO additional cost to you!)


Mold:  https://amzn.to/2EdRwCt
India ink:  https://amzn.to/2H4LnWQ
Pigment powder:  https://amzn.to/2G3re2d
Seed beads:  https://amzn.to/2EcLeCW
Confetti:  https://amzn.to/2CGnpyK
Resin (use whatever resin brand you like):
Easy Cast:  https://amzn.to/2yjYmBC
Art Resin:  https://amzn.to/2yk9X3z
Clear Cast:  https://amzn.to/2z4rxGw
FX Epoxy:  https://amzn.to/2AF3Pkk
Cricut (Amazon):  https://amzn.to/2wChE2l  
Cricut (Cricut site):  https://www.shareasale.com/r.cfm?B=993649&U=1248544&M=51766&urllink=

Cricut vinyls:  https://amzn.to/2w4DOJj



Directions:



1.  I have this heart mold that I found online.


2.  I mixed some resin depending on how many you want to make, but you can start with an ounce or two.

3.  I mixed in some metallic pigment powder.



4.  I poured it into the mold cavities and took a lighter and popped the bubbles.  Then I let it sit to harden.  I made a second batch, and added red India ink instead of the pigment powder.





5.  I mixed more resin, separated it and added confetti to some of it and beads to the rest.

Here is the confetti I used.

6.  I poured it onto the already cured resin.

7.  Then I popped the bubbles with the lighter and let it cure a minimum of 12 hours.
8.  Once cured, I removed them from the mold.





9.  I cut Mr and Mrs out of purple glitter vinyl and put it onto the paperweights.



That’s it!  Now you have these beautiful resin paperweights and you can personalize them with different colors


I hope you enjoyed it and hope you found some inspiration in the project!



Remember:  Life’s too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!


Mona

Leave a Comment