Learn how to create a Patriotic Resin Petri Dish Coaster using resin and alcohol inks.
Here is a quick video tutorial, so you can see exactly how I made it:
The links below help support this channel, as I may earn a small commission at no extra cost to you.
You will need:
Mold: http://amzn.to/2FcRd7J
Similar mold: https://amzn.to/2qvEyWP
Alcohol Ink set: https://amzn.to/2r5nhUY
Resin (use whatever resin brand you like):
This is the resin I used for this project:
FX Poxy: http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.
Easy Cast: http://amzn.to/2yjYmBC
Art Resin: http://amzn.to/2yk9X3z
Clear Cast: http://amzn.to/2z4rxGw
Directions:
1. I mixed two ounces of resin and poured one ounce into the mold.
2. I used a lighter to pop any bubbles.
3. I poured the second ounce into the mold.
4. I popped the bubbles with a lighter.
5. I began dropping in alcohol ink. I started with red.
6. I then use the white ink and drop it onto the colors.
7. I repeated with different colors.
8. When you have all the ink you want to add in the resin, let it cure for a minimum of 12 hours.
9. Once cured, I removed it from the mold.
That’s it! Thank you for stopping by! Remember: Life’s too short not to shimmer, so grab your glue gun and your glitter!™ Stay safe!
Mona