Reindeer Resin Coaster Christmas DIY | Another Coaster Friday | Craft Klatch

Learn how to make a reindeer resin coaster!  A Christmas craft tutorial!  

Here is a quick video tutorial, so you can see exactly how I made it:

The links below help support this channel,  as I may earn a small commission at no extra cost to you.

You will need:
Coaster mold:
Fine copper glitter:
White paint:
Black paint:
Brown paint:
Red paint:
Pipe cleaners:
Wire cutters:
Brown felt:
Resin (use whatever resin brand you like):
Easy Cast:
Art Resin:
Clear Cast:
FX Poxy: ~ According to the manufacturer, this one is heat resistant to 500 degrees F.


1.  I mixed one ounce of resin.

2.  I mixed a little bit of copper pigment powder into the resin.  

3.  Then, I added fine copper glitter and mixed it really well.

4.  I poured it into the coaster mold.

5.  I used my lighter to pop the bubbles and let it cure a minimum of 12 hours.

6.  I painted the features onto the coaster, which included:

The eyes…
The snout…
The nose…
The pupils…
The eyelids…
The mouth…

7.  I mixed one ounce of resin and poured it onto the coaster.

You can help move the resin to the edges.

8.  I used my lighter, to pop the bubbles.

9.  I drilled holes into the resin, using my rotary tool.

10.  I cut pieces of pipe cleaners to length.

11.  I cut shorter pieces of the pipe cleaners and wrapped them around the longer pieces.

12.  I added glue to the holes and inserted the pipe cleaners.

13.  I cut pieces of brown felt into ears.  

14.  I added glue to the felt and put the onto the reindeer head.

15.  I sprinkled copper glitter onto the glue areas and shook off the excess.

That’s it!  Now you have a cute reindeer coaster!

Thanks for stopping by!  Remember:  Life’s too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!


Leave a Comment