Learn how to create resin unicorn decor! It’s a fun DIY! It can be a resin coaster, or keep your jewelry organized and use it as a ring holder! It’s fun room decor with just a touch of glitter!
Supplies for Unicorn Decor DIY
*This blog uses affiliate links. As an Amazon Associate I earn from qualifying purchases.
Supplies for Unicorn Decor Coaster
- Coaster mold
- Horn mold
- Horn mold
- Flower mold
- Pigment powder
- White resin
- White feather boa
- Colorful boas
- Pink glitter
- Hot glue
- Clear glue
- Cricut (Amazon)
- Cricut (Cricut site)
- Craft foam
- Cricut vinyls
- When deciding on which resin to use for your coasters, you need to keep in mind whether you want it just for cold cups or for hot ones as well.
- If only for cold drinks, you can be flexible and use whatever brand you like:
- If you want it to work for both hot and cold drinks, you need to look for a heat-resistant resin, like these:
- FX Poxy ~ According to the manufacturer, this one is heat resistant to 500° F.
- Stone Coat
Unicorn Decor Video Tutorial
Be sure to follow me on Instagram!
Unicorn Decor Coasters Directions
I gathered my molds. I used three different molds for this project.
I used pigment powder and brushed it on the inside of the horn mold. It can be a solid color, or a mix of colors.
I did the same with the flower mold.
I used a fast curing resin for this project that cures white, but you can use a clear resin and add white pigment. By dusting the inside of the molds, with the pigment powder, the pigment powder becomes one with the resin.
TIP: For the horns, I had them cure on a slight angle. That way, they would have a little angle when cured.
Once cured, I removed all the parts from the molds.
Look how pretty the horn turned out!
I glued the horns to the coaster, using fast drying glue.
I cut a face out of vinyl with my cutting machine, but you can also paint it on.
I put on the faces.
So far, so good!
I mixed two ounces of clear resin and poured it on the coasters.This gives additional strength to the horn. I used my stir stick, to make sure it went to the edges and popped the bubbles with the lighter. Then, they sat to cure for a minimum of 12 hours.
I cut ears out of craft foam and glued them on with hot glue. The inner, I painted pink and added glue and glitter to the inner ears and where they attach, to make them stronger.
I then added additional glue and put on a piece of the feather boa and trimmed the excess.
I glued on the flowers.
That’s it! Now you have ADORABLE unicorn decor that can be used as coasters or as ring holders.
Have fun with it! I’d LOVE to see what you make! Be sure to share it over on my Craft Klatch Facebook Group! It’s Free! ❤️
Other Fun Projects You Are Going to Love!
There is so much fun unicorn decor out there, I thought you’d might like to see what I found!
Remember: Life’s too short not to shimmer, so grab your glue gun and your glitter!™ Stay safe!
Be sure to PIN IT for later!