Add A Splash Of Color With A Koosh Ball Coaster Resin DIY | Another Coaster Friday

Make an easy resin DIY using a colorful bracelet! It’ll brighten any room with a splash of color and a super fun look!

A friend sent me a cute koosh ball bracelet to incorporate into a craft. I decided it was screaming to be a part of a coaster!!

Of course I thought that!

Holding colorful koosh ball bracelet for the splash of color resin diy
Wearing colorful koosh ball bracelet on wrist

A Splash Of Color

Don’t underestimate what a splash of color can do for your home decor. Even a small splash of color can make a difference!

Here are five home decor projects, DIYs and crafts that add a Splash of Color to Your Home Decor:

  1. Glitter Heart and Gold Leaf Paperweight
    • Even something as small as a paperweight on a desk can make the needed impact.
  2. Resin Straw Coaster
    • This one definitely has a cool effect and will have people asking what it is made of!
  3. Liquid Rainbow Resin Coaster
    • Can you put liquid into a resin DIY? Yes, you can!
  4. Abstract Resin Art
    • Try your hand at resin art! It is so easy and always comes out looking AA-MAZING!
  5. Outdoor Table Makeover
    • Paint a piece of furniture! It’s inexpensive and I went with a fun emoji theme on this one!

Supplies You Will Need For The Splash of Color Resin DIY

  • Resin:
    • When deciding on which resin to use for your coasters, you need to keep in mind whether you want it just for cold cups or for hot as well.
      • If you want it to work for both hot and cold drinks, you need to look for a heat resistant resin, like these:

Here is the Quick Video Tutorial so you can add a Splash Of Color to your room decor!

Koosh ball resin diy splash of color coaster

Directions for the Splash Of Color Resin Coaster

Step 1: Release the Koosh!

Take your scissors and cut the bracelet open. They are attached to elastic so if you just give them a stretch, you can easily cut it without damaging the squishy balls!

Using scissors to cut elastic holding colorful koosh ball bracelet for splash of color resin diy
Koosh Ball beads laying in coaster mold for splash of color resin diy

Step 2: Time For The Resin

Mix your resin according to the package directions. You need enough to coat the squishy balls. Plan on 1 ounce to get them coated. Mix your Koosh balls into the resin. They will float, so be aware. You only need a small amount of resin to coat the Koosh balls.

*The purpose of coating them is so when you put your next (deeper) layer of resin on, they will have cured in the first layer and won’t float.

Mix resin and drop koosh balls into resin

Step 3: Scoop ‘Em

Use your stir stick to scoop out the squishy balls and arrange them in your mold. Excess resin will run off the balls and pool at the bottom of the mold.

Take resin colored koosh balls and place them in coaster mold
Move resin and koosh balls around coaster mold for even placement

Step 4: Pop The Bubbles

Bubble popping is important. Normally, I use a lighter to pop the bubbles in my coasters. For this coaster, you are going to want to be careful with a lighter and either very, very quickly use it to pop the bubbles. Do not pause AT ALL because you risk melting the squishy balls and that’s no good!

As an alternative, you can use a drinking straw and blow through it to pop the bubbles. That eliminates the danger of melting balls!

Once you pop the bubbles, let it cure a minimum of several hours…or longer. That again is for the resin to set enough so the squishy balls don’t float with the next layer.

Use a lighter to pop the bubbles in the resin with the squishy balls

Step 5: More Resin

Now, mix more resin and fill up the rest of the mold. Likely, it will take probably another two ounces. It could take a little more, you just have to see. It depends on how thick your squishy balls are and if you had any floatage.

If they are totally covered, feel free to use your lighter to pop the bubbles. Then, let it cure a minimum of 12 hours.

Add more resin to the Koosh ball coaster

Step 6: Remove It

Once cured, you can remove the coaster from the mold. This will be a nice thick coaster.

Remove resin coaster from th mold

The Reveal!

Now, you have an awesome resin DIY coaster that will add whimsy and a splash of color to your room decor!

Koosh ball resin coaster reveal

Total awesome sauce!

This coaster was easy, fun, and totally delivered on adding a splash of color!

For a really easy splash of color project, try making these DIY Beachy Vases! So easy and so pretty!

Thanks for stopping by! Stick around and you will find other great projects!

Remember: Life’s too short not to shimmer, so grab your glue gun and your glitter!™

Stay safe!

Mona

Six Things That Remind Me Of The Koosh That You Might Need In Your Life!

Splash of color resin diy

Leave a Comment